The 2.8-liter Great Wall GW2.8TC diesel engine was produced in China from 2006 to 2011 and was installed on the popular Hover H2 SUV or a similar Wingle 3 pickup truck. This unit is a clone of the Isuzu 4JB1 diesel engine with the Bosch CRS2.0 fuel system.
Specifications
| Production years | 2006-2011 |
| Displacement, cc | 2771 |
| Fuel system | Common Rail |
| Power output, hp | 95 |
| Torque output, Nm | 225 |
| Cylinder block | cast iron R4 |
| Block head | aluminum 8v |
| Cylinder bore, mm | 93 |
| Piston stroke, mm | 102 |
| Compression ratio | 17.2 |
| Features | OHV |
| Hydraulic lifters | no |
| Timing drive | belt |
| Phase regulator | no |
| Turbocharging | MHI TF035HM |
| Recommended engine oil | 10W-40 |
| Engine oil capacity, liter | 5.2 |
| Fuel type | diesel |
| Euro standards | EURO 3 |
| Fuel consumption, L/100 km (for Great Wall Hover 2009) — city — highway — combined |
10.3 8.4 9.1 |
| Engine lifespan, km | ~250 000 |
| Weight, kg | 240 (with attachments) |
The engine was installed on:
- Great Wall Hover H2 in 2006 – 2010;
- Great Wall Wingle 3 in 2006 – 2011.
Disadvantages of the Great Wall GW2.8TC engine
- The crankcase ventilation is the most troublesome, oil often presses through the dipstick;
- In second place here is the rapid wear of injectors, sometimes they are enough for 100,000 km;
- Also, the EGR valve quickly clogs here and many owners simply turn it off;
- The engine does not start well in cold weather, improvements are required for a confident start in winter;
- The weak points of the engine include the water pump, generator, oil pump and timing belt;
- There are no hydraulic lifters and the valve clearance has to be adjusted every 40,000 km.