Category: BMW

Together with the large-capacity N62B48 engine, the younger brother N62B40 also came out. The basis for the creation of this motor was the N62B48, in the cylinder block of which a crankshaft with a piston stroke reduced to 84.1 mm was installed, the cylinder diameter was reduced from 93 mm to 87 mm. The cylinder […]

The basis for the development of the N62B36 was the older brother N62B44, in the cylinder block of which a crankshaft with a stroke of 81.2 mm (was 82.7 mm) was installed, the cylinder diameter was reduced to 84 mm (was 92 mm) and the connecting rods were replaced. The cylinder head is similar to […]

The BMW M62B48 engine (or Alpina F5) was developed by Alpina based on the M62B46. Technically, this engine is similar to the M62TUB44. The F5 engine was introduced in the E39 B10 in late 2002. The main modification from the F4/1 engine is a longer stroke from 85 mm to 89 mm (3,5 inch), increasing […]

The BMW M62 engine was released to replace the M60 and was produced from 2001 to 2003. Introduced in 1999, the BMW X5 E53 quickly gained a reputation as a dynamic sports SUV and the power of the standard 4.4-liter M62B44 seemed insufficient. Therefore, it was decided to modernize it and the M62B46 engine appeared. […]

In 1996, the M60 engines were replaced by a new modified M62 series, and the M60B40 engine was replaced by the updated M62B44. The basis for the creation of a 4.4-liter power unit was the predecessor M60B40, the cylinder block of which has changed for an increased cylinder diameter, the sleeves here are nikasil, since […]

The new model of the junior V8 BMW M62B35 entered the assembly line in 1996 and replaced the M60B30. The basis for the creation of this engine was the M62B44 engine, in the block of which a short-stroke crankshaft was installed, and the cylinder diameter was reduced to 84 mm. The sleeves remained nikasil and […]

The M60B40 engine block is 90° camber aluminum with nickel-plated liners and forged crankshaft. Since the end of 1994, the block has been replaced with a more reliable one made of alusil, the piston, respectively, has also changed. Aluminum cylinder heads with two camshafts, 4 valves per cylinder, with hydraulic compensators. The diameter of the […]

The basis for the creation of a small V8 M60B30 was the M60B40, in the cylinder block of which a short-stroke cast crankshaft was installed (stroke 67.6 mm versus 80 mm for the M60B40), and the cylinder diameter was reduced to 84 mm (was 89 mm). Changed, respectively, pistons and connecting rods. Cylinder heads from […]

A series of 6-cylinder BMW B58B30 engines with a volume of 3.0 liters has been assembled in Munich since 2015 and put on charged modifications of rear- and all-wheel drive models of the German concern. There are two generations of such engines and the line of S58 sports units created on their basis. B58 are […]

The 3.0-liter BMW N55B30 turbo engine was produced by the German concern from 2009 to 2018 and was installed on almost all major models of the company, including X-series crossovers. Alpina created several of its especially powerful power units based on this engine. The engine was installed on: BMW 1-Series E87 in 2010 – 2013; […]